Which steel grades match Zirconia Slide Plate best?
Oct 13, 2026
Zirconia slide plate is a key refractory part to control molten steel flow in continuous casting. It withstands erosion and slag corrosion. Changtai manufactures zirconia slide plates to suit different steel grades.
Suitable steel grades
1. Calcium-treated steel
Calcium in molten steel reacts with conventional refractory materials. Ordinary alumina-carbon slide plates wear quickly in this condition. Zirconia slide plate supports longer continuous casting sequences.
2. Stainless steel
This category covers 304, 430 and heat-resistant stainless steel. Slag with high chromium content creates strong corrosion. Zirconia slide plate slows down material loss and maintains stable casting speed.
3. Alloy steel
Examples include high manganese steel, low-alloy structural steel and high-strength alloy steel. These grades run at higher molten steel temperature and bring strong scouring force. Zirconia slide plate limits bore enlargement during multi-heat casting.
4. Low carbon and ultra-low carbon steel
Production of these steels requires strict steel purity. Zirconia slide plate releases little carbon. It prevents extra carbon mixing into molten steel.
5. Ordinary carbon steel
This includes mild carbon steel, rebar steel and wire rod steel. Standard alumina-carbon slide plates are acceptable for short casting tasks. Zirconia slide plate is selected when longer casting campaigns are needed.
Selection guide
Alumina-carbon slide plates are widely used for normal carbon steel with short casting cycles. Choose Changtai zirconia slide plate if your production faces corrosive molten steel, long casting time or high steel purity requirements.






