How to select the right Zirconia Slide Plate specification?
Oct 13, 2026
Zirconia slide plate controls molten steel flow for continuous casting. Wrong specification leads to bore enlargement, cracking, steel leakage or short service life. Changtai shares key points to select proper zirconia slide plate.
1. Confirm steel grade and casting parameters
Steel grade decides required zirconia content. Calcium-treated steel, stainless steel and alloy steel need higher zirconia content for anti-corrosion. Low carbon and ultra-low carbon steel requires low carbon release from the plate. Collect working temperature, heats per sequence and slag type before selection.
2. Check dimensional specifications
Match plate outer size, thickness and bore diameter to your slide gate assembly.
- Bore diameter: set based on target casting speed and molten steel flow rate.
- Plate shape: square or round, according to ladle/tundish slide gate structure.
- Flatness and tolerance: sliding surface flatness directly affects sealing performance. Poor flatness causes steel penetration.
3. Select material grade
Two common types: zirconia insert slide plate and full zirconia slide plate.
Zirconia insert plate: zirconia only at the flow hole area. Lower cost, works for normal multi-heat casting.
Full zirconia plate: full zirconia material. Suitable for heavy corrosion, long sequence casting. Check physical indexes: bulk density, cold crushing strength and apparent porosity.
4. Evaluate thermal shock resistance
Temperature changes during casting may cause cracks. For frequent start-stop casting, choose zirconia slide plate with good thermal shock resistance.
5. Balance service life and cost
Full zirconia plate has longer life but higher price. Do not over-spec for simple carbon steel production. For long casting campaigns or hard-to-cast steel, upgrade to higher zirconia grade to cut total refractory cost.
Contact Changtai to get matched zirconia slide plate specification and technical support for your continuous casting line.






