What is the difference between zirconia nozzle and alumina nozzle?
Nov 07, 2026
Zirconia nozzles and alumina nozzles are two mainstream refractory flow control parts for continuous casting tundish. Many steel plants use alumina-carbon nozzles for standard casting, while zirconia inserts or full zirconia nozzles are widely adopted for high-grade steel and long sequence casting. They differ greatly in chemical stability, anti-scouring performance, applicable steel grades and overall operation cost.
Raw material & basic property
- Alumina nozzle is mainly based on Al₂O₃, most commercial versions adopt alumina-carbon formula with graphite additive to improve thermal shock resistance. It has good mechanical strength and moderate slag resistance under normal temperature fluctuation.
- Zirconia nozzle is made of stabilized zirconia (ZrO₂). Yttria, magnesia or calcia is added as stabilizer to avoid phase transformation cracking. It features much higher density, better chemical inertness against molten steel and less wetting by steel liquid.
Erosion & bore stability
- This is the biggest gap between the two. Alumina material will gradually react with tundish slag, calcium-treated steel and high-alloy molten steel. After several heats, the inner bore expands unevenly, the round shape deforms, and casting speed becomes hard to stabilize. It is easy to form steel adhesion and clogging on the inner surface.
- Zirconia shows outstanding resistance to molten steel scouring and slag corrosion. The bore size stays stable during long sequence casting. It reduces bore enlargement, which is critical for metering nozzles without stopper control. That is why zirconia inserts are used for small billet fixed-diameter nozzles.
Thermal shock performance
- Standard alumina-carbon nozzle has reliable thermal shock resistance. The carbon phase helps release thermal stress, so it tolerates frequent startup, shutdown and temperature fluctuation better than pure sintered zirconia.
- Pure zirconia is more sensitive to sharp temperature change. Poor-quality stabilized zirconia may crack or peel after emergency stop and reheat. For this reason, composite design is popular: alumina outer body + zirconia inner insert, balancing thermal shock and anti-erosion.
Steel grade application
- Alumina nozzle works well for common low carbon steel, plain carbon steel and short casting sequences. It is a cost-effective choice for general steel grades with low slag aggressiveness.
- Zirconia nozzle is preferred for ultra-low carbon steel, silicon steel, stainless steel, calcium-treated steel and high alloy steel. These steel grades have strong corrosion tendency; alumina nozzle will wear out quickly and introduce inclusions. Zirconia minimizes reaction and helps improve steel cleanness.
Service life and cost
- Alumina nozzle has lower unit price. But its service sequence is shorter, and replacement frequency is higher for heavy-duty steel grades. Frequent nozzle change brings extra downtime and labor cost.
- Zirconia nozzle carries higher upfront material cost. However, its longer service life reduces shutdown times, stabilizes casting speed and lowers slab rejection rate. For high-value clean steel production, the comprehensive economic benefit is better.
Quick comparison table
| Item | Alumina Nozzle (Al₂O₃ / Al₂O₃-C) | Zirconia Nozzle (Stabilized ZrO₂) |
|---|---|---|
| Core advantage | Good thermal shock, low cost | Superior anti-erosion, stable bore |
| Weakness | Easy to react with alloy / calcium steel, bore enlarges fast | Higher raw cost, sensitive to violent thermal shock |
| Best for | Plain carbon steel, short sequence casting | Clean steel, stainless steel, long sequence metering nozzle |
| Common structure | Whole alumina-carbon | Full zirconia insert or alumina shell + zirconia core |
| Clogging risk | Higher for special steel | Lower |
Selection guide
Choose alumina nozzle if you mainly cast ordinary carbon steel with short sequences and strict budget control. Switch to zirconia nozzle or zirconia insert when you produce clean steel, silicon steel, stainless steel or run long continuous casting heats. Many steel mills adopt composite nozzles as the most practical solution.
Alumina nozzle is a general-purpose refractory for conventional casting, while zirconia nozzle targets high-corrosion and high-quality steel production. The selection should not only compare material price, but also take casting sequence, steel grade requirement, casting speed stability and slab quality target into account.





