What is Zirconia Slide Plate? Properties, Materials and Application for Steelmaking
Sep 22, 2026
Zirconia slide plate is a high‑performance critical refractory component for sliding‑gate nozzle systems in steel continuous‑casting production. Mounted on the bottom of ladles and tundishes, paired upper and lower zirconia slide plates slide against each other to adjust nozzle opening size, precisely controlling molten‑steel flow rate and casting stability. Compared with conventional alumina‑carbon slide plates, zirconia‑based slide plates deliver far superior high‑temperature durability, solving frequent wear, hole enlargement and steel‑leak risks under severe casting conditionsayctgy.bce.... Changtai has optimized zirconia slide plate formulation and integrated sintering technology to produce monolithic and insert‑type zirconia slide plates for global steel mill customers.
Core Properties of Zirconia Slide Plate
Working under 1500‑1700 ℃ cyclic thermal shock, molten-steel scouring and slag corrosion, qualified zirconia slide plates must satisfy the following key performance indicators:
1. High-temperature corrosion & erosion resistance: Resist chemical attack from alkaline slag and molten steel, slow orifice enlargement during multi-heat continuous casting.
2. Thermal-shock stability: Tolerate sharp temperature swings between ambient temperature and molten-steel temperature, reducing surface cracking and spalling failure.
3. Hot strength & compact microstructure: Low apparent porosity, high bulk density, resist friction wear between sliding contact surfaces.
4. Dimensional stability: Keep geometry unchanged under repeated thermal cycles, guarantee tight fitting of slide-gate assembly and avoid steel leakage risks.
5. Anti-adhesion performance: Restrain cold-steel and inclusion buildup on inner bore, reduce nozzle clogging probability for clean-steel casting.
Main Material Types
Zirconia slide plates on the market are divided into two mainstream technical routes according to material structure:
1. Monolithic full-zirconia slide plate
Made of high-purity stabilized zirconia via isostatic pressing and high-temperature integrated sintering. The whole plate adopts zirconia refractory without composite mosaic structure. It features uniform erosion resistance, no joint peeling risk, suitable for multi-heat long-sequence continuous casting, special steel and calcium-treated steel production. Higher raw-material cost limits its large-scale full-plate adoption in general carbon-steel lines.
2. Composite zirconia-insert slide plate (widely adopted)
The substrate adopts alumina-carbon base material; high-purity magnesia-stabilized zirconia ring is embedded around the molten-steel flow bore where erosion concentrates. Only the key bore area uses zirconia material. This design balances service-life promotion and overall production cost, becoming the most cost-effective solution for most steel plants.
Steelmaking & Continuous-casting Applications
1. Ladle sliding-gate system: Core consumption part for ladle tapping flow regulation. Zirconia slide plates extend service life to 5-10 times versus ordinary alumina-carbon plates, cutting refractory replacement frequency and ladle turnaround downtime.
2. Tundish sliding nozzle control: Applied for tundish flow adjustment in continuous-casting strands, stabilizing molten-steel feeding into mould and improving billet surface quality.
3. Special-steel production scenarios: Preferred for stainless steel, alloy steel, calcium-treated steel and high-cleanliness steel grades. It resists aggressive slag corrosion, lowers non-metallic inclusions inside steel ingot, prevents unplanned casting shutdown caused by slide-plate damage.
4. Large-capacity ladle & long-sequence casting: For large ladles and multi-heat consecutive casting campaigns, zirconia slide plates mitigate frequent thermal-mechanical erosion damage, enhance whole-process casting safety.
Practical Usage Tips from Changtai
- Complete visual inspection for cracks or impact damage before installation. Perform dry assembly check to confirm fit clearance.
- Strictly follow heating curve for slow pre-baking, avoid sharp temperature rise that induces thermal-shock cracking.
- Operate slide-gate movement smoothly during casting; avoid frequent large-stroke sliding to mitigate local bore erosion.
- After casting completion, inspect orifice wear and sliding surface condition, judge whether grinding or replacement is required.
Zirconia slide plate represents an important upgrade of sliding-gate refractory materials. While initial procurement cost is higher, its longer service cycle reduces refractory consumption, production loss and safety risks, bringing comprehensive economic benefits for modern steelmaking plants. As a professional refractory manufacturer, Changtai supplies monolithic zirconia slide plates and zirconia insert components with custom dimensions, supporting sample testing for different steel-grade working conditions.






