CNM upper Exchange Nozzle
CNM Quick Change nozzle is a non-replaceable fixed nozzle, which is installed at the bottom of the tundish. The molding method of CNM is press molding. The sintered Zirconia insert is fixed in the mold, and then the outer alumina material is filled into the mold.
CNM Quick Change nozzle is a non-replaceable fixed nozzle, which is installed at the bottom of the tundish. The molding method of CNM is press molding. The sintered Zirconia insert is fixed in the mold, and then the outer alumina material is filled into the mold. After the CNM finished product is dried and polished, the final product is finished. CNM Quick Change nozzle and CNC quick change nozzle use the same principle, on the product itself requires a longer service life.
Zirconia Inserts Tundish Nozzle Outside | ||||||
CT-PMD1 | CT-PMD2 | CT-PMD3 | CTAL75 | CTAL85 | CTAL95 | |
Physical Properties | ||||||
Apparent Porosity (%) | 11-12 | 8-10 | 6-8 | 20 | 18 | 16 |
Bulk Density (g/cm3) | ≥4.9 | ≥5.2 | ≥5.3 | 2.6 | 2.8 | 3.0 |
Chemical Analysis (%) | ||||||
ZrO2 + HfO2 | ≥94.0 | ≥95.5 | ≥96 | / | / / | |
SiO2 | 1.1 | 0.23 | 0.5 | 20 | 13 | 8 |
TiO2 | 0.2 | 0.2 | 0.1 | 3 | 2.1 | 0.3 |
Fe2O3 | 0.5 | 0.05 | 0.05 | 2.5 | 2.0 | 0.58 |
Al2O3 | 0.4 | 0.42 | 0.1 | ≥75 | ≥85 | ≥90 |
CaO | 0.2 | 0.15 | 0.15 | 0.2 | 0.1 | 0.20 |
MgO | 2.5 | 2.4 | 2.4 | 0.2 | 0.1 | 0.06 |
Na2O | 0.03 | 0.01 | 0.01 | 0.6 | 0.5 | 0.3 |
Hot Tags: CNM upper Exchange Nozzle, China, suppliers, factory, buy, quotation, made in China, CNM Lower Exchange Nozzle, CNM Exchange Nozzle, CNMupper Exchange Nozzle, Press Type CNM Exchange Nozzle, CAST Type CNM Exchange Nozzle, CNC Exchange Nozzle
Send Inquiry
