Is Zirconia Slide Plate suitable for stainless steel casting?
Oct 26, 2026
Short answer: Yes, zirconia slide plate (especially zirconia insert composite type) is highly suitable for stainless steel continuous casting.
Stainless steel features high alloy content, high chromium, strong slag corrosivity and strict requirements against inclusion contamination. Ordinary alumina‑carbon slide plates suffer fast bore erosion, slag penetration and sticking, which easily cause unstable flow control and casting interruptions.
Changtai zirconia slide plates adopt magnesia-stabilized zirconia at the molten steel channel.
- Excellent resistance to Cr‑bearing slag and alloy molten steel erosion
- Dense structure reduces steel infiltration and cold steel buildup
- Stable sliding surface for long-sequence stainless steel casting
- Less risk of re‑oxidation and foreign inclusions that hurt stainless steel surface quality
Two mainstream options from Changtai:
- Zirconia insert slide plate (recommended for most stainless steel lines) Zirconia core only at the flow hole, alumina‑carbon body. Balances performance and refractory cost, widely used for 304, 316 and duplex stainless steel.
- Full zirconia slide plate For ultra-long sequence, high-alloy stainless steel and heavy refining slag conditions, maximum service life.
Notes
Zirconia grade and stabilizer must match your stainless steel slag basicity. Improper zirconia formulation may still react with high-basicity refining slag. Changtai provides custom zirconia slide plate formulation based on your steel grade and ladle operation parameters.
Alumina-carbon plates are generally not preferred for continuous stainless steel production, though they can work for single-heat small-ladle trial casting.






