Common Failure Modes of Zirconia Insert and Improvement Measures

Oct 30, 2026

Zirconia inserts are key refractory parts for continuous casting nozzles. During actual casting production, premature failure frequently affects casting stability and production efficiency. Typical failure forms include thermal shock cracking under rapid temperature change, bore enlargement caused by continuous erosion from molten steel and slag, peeling and delamination at the bonding interface, steel penetration and nozzle clogging.

 

Based on rich production and site service experience, Changtai has sorted out targeted improvement measures:

  1. Optimize zirconia raw material formulation and stabilizer ratio to greatly enhance thermal shock resistance.
  2. Raise product bulk density and refine internal microstructure, slowing the corrosion and scouring from molten steel and slag.
  3. Upgrade the bonding structure and machining fitting tolerance between the insert and nozzle body to prevent separation and steel leakage.
  4. Strictly manage the whole sintering schedule, lower internal pores and hidden defects inside the zirconia insert.
  5. Provide customers with standardized operation guidance for preheating and casting, to avoid sharp temperature fluctuation damage.

 

After adopting these upgrades, our zirconia inserts show stable performance and obviously extended service life, helping steel plants cut downtime and refractory consumption. Feel free to contact Changtai for customized zirconia refractory products and technical support.