Why Is Zirconia the Preferred Material for Tundish Metering Nozzles?
Sep 29, 2026
Tundish metering nozzles are key refractory parts for steel continuous casting. They control molten steel flow and keep mould level steady during production. These parts work under high‑temperature conditions, subject to steel scouring and slag corrosion. Zirconia is widely selected for tundish metering nozzles in steel plants.Changtai breaks down the practical factors behind this material choice.
1. Anti‑Erosion Capacity Maintains Bore Dimension
Metering nozzles need to hold inner bore size through casting runs. Bore wear shifts flow rates and causes mould level changes, which bring billet quality issues.
Zirconia resists scouring from molten steel and chemical attack by tundish slag. Against alumina and other refractory materials, zirconia shows lower wear rate under casting conditions. It prevents bore expansion and irregular inner‑hole shape, and keeps molten steel flow unchanged over casting sequences.
2. Thermal Shock Performance Supports Continuous Casting
Field operations create frequent temperature shifts for tundish nozzles, including preheating, ladle swap and casting interruptions. Temperature change builds thermal stress inside refractories, which leads to cracking and spalling.
Zirconia has a low thermal expansion rate. It stands repeated thermal cycles without structural failure. This cuts nozzle failure events, enables long‑sequence casting and reduces unplanned line stops.
3. Low Inclusion Sticking Reduces Blockage Risk
When casting carbon steel and alloy steel, alumina and other inclusions in molten steel stick to nozzle inner walls. This narrows the bore and changes flow status.
Zirconia stays chemically stable at high temperature. It limits attachment of slag and inclusions. Nozzle clogging occurs less often, and molten steel flow stays smooth.
4. Fit for Long‑Sequence Casting Work Conditions
Steel mills extend casting sequences to raise output. Other refractory grades wear fast and require frequent nozzle change‑out, which disturbs production schedules.
Zirconia metering nozzles retain physical and chemical properties during long high‑temperature exposure. Service life per casting run goes up, replacement work drops, and caster line efficiency improves.
Practical Application Notes
Zirconia nozzles deliver expected performance only with correct site operation. Operators need to follow preheating procedures, control tundish slag, and track mould‑level data. Improper handling will speed up wear and cause part damage.
Zirconia is chosen for tundish metering nozzles for four main reasons: erosion resistance, thermal‑cycle stability, lower inclusion sticking, and compatibility with long‑sequence casting. It addresses common on‑site troubles: flow variation, mould‑level swing and short service cycles.
Changtaimanufactures zirconia tundish metering nozzles. Our products keep bore dimension for long‑sequence casting, and fit multiple steel grades and casting processes. We supply refractory solutions for steel continuous casting.
Contact Changtai for product data and custom options.






