Which Zirconia Grade Is Suitable for Your Tundish Slide Gate Application?
Oct 04, 2026
Zirconia slide plates control molten steel flow in tundish slide gate systems. Different zirconia grades deliver different performance under varying casting conditions. Selecting the correct grade reduces refractory wear and prevents unplanned casting stops. As a refractory manufacturer, Changtai supplies multiple zirconia grades to match diverse continuous‑casting working conditions.
Core Factors to Match Zirconia Grade
Steel Grade Being Cast
Carbon steel creates mild erosion on slide plate bores. Standard zirconia grades work for most regular carbon steel casting. Alloy steel and high‑cleanliness steel carry higher slag corrosion. Higher purity zirconia grades are required to resist slag penetration and bore enlargement.
Casting Sequence Length
Short sequence casting runs with limited heats can use conventional zirconia grades. Long sequence continuous casting needs high density zirconia. It slows bore erosion and maintains stable steel flow for extended production cycles.
Tundish Temperature & Slag Condition
High tundish temperature and reactive slag accelerate refractory degradation. Select stabilized zirconia grades to limit chemical attack from molten slag. Low slag conditions allow the use of general zirconia grades.
Slide Gate Operation Frequency
Frequent opening and closing of slide gates creates friction and thermal cycling. Zirconia grades with good thermal shock resistance lower the risk of cracking and spalling. Less frequent flow adjustment can use standard grades.
Common Zirconia Grades for Slide Gate
1. Standard stabilized zirconia: For carbon steel, short to medium casting sequences, low slag content. Balances service life and material cost.
2. High purity stabilized zirconia: For alloy steel, long sequence casting, aggressive slag. Resists chemical corrosion and bore wear.
3. Low silica zirconia grade: For ultra‑clean steel production. Reduces contamination to molten steel.
Matching Rules for Site Selection
- Confirm steel type and tundish slag property first. Slag is the main factor causing zirconia lining erosion.
- Check target casting sequence length. Longer sequences require higher grade zirconia.
- Review slide gate operation frequency. Frequent movement needs better thermal shock resistance.
- Compare total running cost instead of only unit price. Higher grade zirconia reduces downtime and reject steel loss.
Share your casting parameters including steel grade, heats per sequence and tundish slag composition with your refractory supplier. The technical team atChangtai can recommend the proper zirconia grade for your tundish slide gate system based on real‑world site data.





