Tundish Metering Nozzle: Key Refractory Component for Stable Steel Continuous Casting

Sep 29, 2026

In modern steel continuous‑casting workshops, many refractory parts work under high‑temperature molten‑steel conditions. Among them, the tundish metering nozzle occupies a small physical size, yet it carries core process responsibilities for the whole casting line. Installed at the bottom of the tundish, this refractory part serves as the fixed flow‑control outlet between tundish and mould, governing the volume of molten steel flowing into the crystallizer during billet casting.

 

Different from slide‑gate or stopper‑rod flow‑control structures, the metering nozzle relies on its calibrated inner bore dimension to maintain relatively steady molten‑steel flow. It is widely adopted in billet and bloom continuous‑casting lines, especially for long‑sequence casting of carbon steel and low‑alloy steel grades. Its working environment remains harsh: direct contact with 1500℃+ molten steel, repeated thermal cycles, chemical corrosion from slag and steel inclusions, as well as scouring from high‑speed liquid‑steel streams.

 

Stable bore geometry is the core performance requirement for a tundish metering nozzle. When the inner bore suffers gradual erosion, the actual flow rate of molten steel will deviate from process settings. Mold level fluctuation will occur accordingly. Unstable liquid‑level conditions inside the mould bring multiple risks: slag entrapment, non‑metallic inclusion formation, surface defects on casting billets, and dimension inconsistency of finished semi‑products. In severe cases, abnormal bore expansion or nozzle cracking can trigger unplanned tundish shutdown and production loss.

 

Two typical failure modes frequently appear in field operation. The first is bore enlargement caused by steel‑slag erosion. Continuous scouring and chemical reaction wear down the inner hole, changing flow parameters step by step. Operators need to track casting duration and mould‑level variation to judge whether replacement is required. The second failure is thermal‑shock cracking and spalling. Fast temperature rise during tundish filling or sharp temperature drop during ladle change generates thermal stress inside the refractory body. Cracks or material peeling will break nozzle integrity and disturb steel flow status. Partial clogging is another common issue; accumulated alumina or other inclusions narrow the flow channel and reduce molten‑steel throughput, further breaking casting stability.

 

Proper on‑site operation extends nozzle service cycles. Pre‑heating procedure must follow specifications to avoid acute thermal impact. Tundish slag level and slag composition need regular monitoring to reduce aggressive slag contact against nozzle outer surface. Operators should record actual casting sequence time, observe mould‑level fluctuation trend, and compare real‑casting flow rate against theoretical values. These practical monitoring methods help identify nozzle deterioration at an early stage and arrange timely swap‑out before critical failure happens.

 

For steel mills pursuing longer continuous‑casting sequences, the metering nozzle directly restricts maximum casting heat. Upgrading nozzle performance or optimizing operating rules can lower unplanned downtime frequency. 

 

Steel plant operators may evaluate nozzle performance from practical perspectives: actual service life under local steel‑grade conditions, consistency of flow‑control effect throughout the whole casting cycle, anti‑erosion and thermal‑shock resistance under real‑site thermal cycles, and interchange compatibility with existing tundish nozzle assemblies.

 

If you are looking for reliable tundish metering nozzle technical support or product solution, welcome to send your working‑condition parameters for further communication.

Contact now