In Order To Ensure The Spray Effect Of The Nozzle, The Nozzle Of Each Nozzle Is Carefully Pecked

The nozzle is the gas protection source of the welding gun. The shape of the nozzle has a great influence on the movement of the air flow. The commonly used nozzle shapes are cylindrical and conical.

The chemical properties of pesticides depend on the methods recommended by chemical manufacturers. It is very important to choose the right nozzle and use the correct operation method.

Carefully cleaning the clogged nozzle can extend the service life of the nozzle and enhance the use effect of the nozzle. In order to ensure the spray effect of the nozzle, the nozzle of each nozzle is carefully carved. Even the damage caused by improper cleaning may affect the flow rate and spray distribution. In the process of use, be sure to use enough filters and spray system to reduce clogging.

If the nozzle is indeed clogged, it can only be cleaned with a soft brush or toothpick and the cleaning process must be very careful, even using a wooden toothpick to clean the nozzle buckle may distort the orifice.

Nozzles are widely used in the industry, with materials ranging from stainless steel, plastics to silicon carbide, polytetrafluoroethylene, PP (engineering plastics), aluminum alloys, and tungsten steel. The applications are generally used in automobiles, electroplating, surface treatment, and high-pressure cleaning , Dust removal, cooling, desulfurization, humidification, mixing, gardening and other industries.

Because the nozzle is designed according to its work under a variety of different spray conditions, the nozzle suitable for the needs is selected in order to achieve the best spray performance in use. The characteristics of the nozzle are mainly reflected in the spray type of the nozzle, that is, the shape of the liquid when it leaves the nozzle port and its operating performance. The name of the nozzle is divided into fan shape, cone shape, liquid column flow (ie jet), air atomization, and flat nozzle according to the spray shape. The cone nozzle is divided into two categories: hollow cone and solid cone;