Inserts Play A Good Role In Environmental Protection

1. Copper inserts are commonly known as copper inserts, copper inserts, inlaid copper nuts, injection-molded copper nuts, etc. It is a kind of copper fittings embedded in plastics and has a wide range of uses.

2. Copper inserts generally use ordinary brass, while Company uses environmentally friendly lead-free copper, which plays a very good environmental protection role.

3. The main purpose of the copper insert is to inject the product into some plastic parts. After installation, an effective internal thread can be formed on the plastic part. The operation method is to insert the product into the plastic part after heating or to directly inject the mold. Because brass has good thermal conductivity, pressing the copper insert into the plastic matrix after heating can make the product quickly heat up and speed up the work efficiency. The heated copper insert can also quickly transfer heat to the plastic part, so that the plastic The perimeter of the hole becomes soft, so that the product is quickly pressed into the hole. If the mold is used for injection molding, the copper insert is hot injected into the plastic part. Due to the embossing process of the outer diameter of the product, a certain friction and biting force are formed with the product after forming, which can be fixed inside so that it cannot fall off.

Hot-melt nuts: Hot-melt embedding is the most common and most common way of embedding, usually with a hot-melt machine and a manual electric soldering iron.

Injection nut: Injection molding is generally required for the diameter of the nut. The aperture is controlled within 0.05mm, because the product is fixed by MoldingPin and placed in the injection molding mold. The diameter of the nut is controlled by the size of the PIN of the injection molding machine. .