CNM Lower Exchange Nozzle
The ZIRCONIA INSERT IN THE CNM quick change nozzle is fired and molded, and then the Zirconia insert is put into the CNM iron shell. Forming methods are divided into vibration molding and compression molding.
CNM Quick Change nozzle is a kind of replaceable Tundish nozzle.
The ZIRCONIA INSERT IN THE CNM quick change nozzle is fired and molded, and then the Zirconia insert is put into the CNM iron shell. Forming methods are divided into vibration molding and compression molding.
CNM Quick Change nozzle service life is 10-15 furnace, also according to the steelmaking site environment to adjust the Zirconia insert formula has met the customer's use requirements.
Zirconia Inserts Tundish Nozzle Outside | ||||||
CT-PMD1 | CT-PMD2 | CT-PMD3 | CTAL75 | CTAL85 | CTAL95 | |
Physical Properties | ||||||
Apparent Porosity (%) | 11-12 | 8-10 | 6-8 | 20 | 18 | 16 |
Bulk Density (g/cm3) | ≥4.9 | ≥5.2 | ≥5.3 | 2.6 | 2.8 | 3.0 |
Chemical Analysis (%) | ||||||
ZrO2 + HfO2 | ≥94.0 | ≥95.5 | ≥96 | / | / / | |
SiO2 | 1.1 | 0.23 | 0.5 | 20 | 13 | 8 |
TiO2 | 0.2 | 0.2 | 0.1 | 3 | 2.1 | 0.3 |
Fe2O3 | 0.5 | 0.05 | 0.05 | 2.5 | 2.0 | 0.58 |
Al2O3 | 0.4 | 0.42 | 0.1 | ≥75 | ≥85 | ≥90 |
CaO | 0.2 | 0.15 | 0.15 | 0.2 | 0.1 | 0.20 |
MgO | 2.5 | 2.4 | 2.4 | 0.2 | 0.1 | 0.06 |
Na2O | 0.03 | 0.01 | 0.01 | 0.6 | 0.5 | 0.3 |
Hot Tags: CNM lower exchange nozzle, China, suppliers, factory, buy, quotation, made in China, CNMupper Exchange Nozzle, CNC Exchange Nozzle, CNM Lower Exchange Nozzle, CNM Exchange Nozzle, Press Type CNM Exchange Nozzle, CAST Type CNM Exchange Nozzle
Send Inquiry
